• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

mutoh problems

p3

p3

New Member
I am having problems with the quality of prints. They were looking pretty fuzzy and not clean lines and streaky. So i did the nozzle check and it looks like the first picture attached so i did some cleaningd, cleaned the maintenance station, emptied the waste ink did another head cleaning, another nozzle check and it wad worse. I cant get it any better now. Any ideas?
 

Attachments

  • ForumRunner_20110430_105953.png
    ForumRunner_20110430_105953.png
    374.5 KB · Views: 101
  • ForumRunner_20110430_110037.png
    ForumRunner_20110430_110037.png
    384.5 KB · Views: 83
Robert M

Robert M

New Member
Cleaning

Looks like a value jet. try putting some cleaning solution in the cap top and see if it drains out, you may have a clogged tube. Most times if you can't get good pull from the pump you get drop out like you have. Another thing it could be is dried ink on the head. get a clean piece of rag the size of the cap top. soak it in cleaning solution and move the head back over the cap top, let it soak for a few hours.
 
You must log in or register to reply here.
Top