Mutoh VJ1638UH has two print heads but only one is printing.

[Dianne V]

Change both printheads input new ID numbers, but only head # 1 prints when I perform a Nozzle check. I can see ink going through the lines when it cleans, but head # two just won't print. Any help PLEASE
Thanks
Printperson.

 

[Solventinkjet]

You probably popped one of the head fuses on the main board. Double check your head cables to make sure they are plugged in nice and straight and aren't damaged or dirty. Then test the fuses on the main board. I've attached a picture where they are. They are 750mA fuses and user replaceable.

 

[Printperson]

You probably popped one of the head fuses on the main board. Double check your head cables to make sure they are plugged in nice and straight and aren't damaged or dirty. Then test the fuses on the main board. I've attached a picture where they are. They are 750mA fuses and user replaceable. View attachment 163087

Thanks. I will check them.