I have a product with a plastic case that has a silkscreened logo that I want to place a decal with my logo, I want it to look professional not a sticker. Any idea what I should be looking for? Any here can produce them?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Need Help Need a decal for a product
- Thread starter Signs101Admin
- Start date
victor bogdanov
Active Member
Cut vinyl decal but have to see design/size first
it's pretty smooth it's only going to be about 3/8 tall by 1-1/4" or less long. I included a picture of what I want to cover.
Attachments
I can do that.
Notarealsignguy
Arial - it's almost helvetica
I'd probably use a high tack printed vinyl and a low sheen or textured laminate depending on the logo. Do you have the logo already? I need something durable and uv resistant.
Last edited by a moderator:
Yes I have the logo, how about a metal foil sticker?
Interesting than I guess to trace cut them it would go on a vinyl cutter?
Notarealsignguy
Arial - it's almost helvetica
It's not something I'm real familiar with. I think it would depend on the surface. You would want something that doesn't show the screen printed through it. You printing them yourself? I'd cut it on a plotter too. Make a run of them as needed.
Buy some acetone, or mineral spirits and Dab a cloth with it... Then gently rub the ink and it should come off pretty easy. From there you can do whatever vinyl design you want.
If you want it to look original though... I'd buy a $25-50 screen printing kit off eBay or Amazon. They're meant for shirts or small things for hobbyists... But it comes with everything you need to burn the screen, and you can easily remove and redo any failed attempts.
Or remove it with acetone... Buy a paint mask with the logo you want and spray paint it.
Imo, it's too small for a cut decal... I'm guessing it's a drone remote? It's really close to the buttons and will likely see a lot of finger friction... So I'd worry it'll fall off or feel weird being a cut vinyl.
If you want it to look original though... I'd buy a $25-50 screen printing kit off eBay or Amazon. They're meant for shirts or small things for hobbyists... But it comes with everything you need to burn the screen, and you can easily remove and redo any failed attempts.
Or remove it with acetone... Buy a paint mask with the logo you want and spray paint it.
Imo, it's too small for a cut decal... I'm guessing it's a drone remote? It's really close to the buttons and will likely see a lot of finger friction... So I'd worry it'll fall off or feel weird being a cut vinyl.
sounds good I can email you my logo
White Haus
Not a Newbie
Depending on the logo/shape etc. you could go with a domed decal. Depending on what size those things are they wouldn't be terribly expensive and would look OEM.
visual800
Active Member
I second this
Boudica
I'm here for Educational Purposes
That's funny, scrolling through this thread I was thinking the exact same thing!