Need Onyx Productionhouse 7.3.2

[Parissan_Print]

Hi all,
I’m looking to download Onyx Productionhouse 7.5.3. I know it is old but maybe anyone have link for me to download? Thank you

 

[Bert Wondervan]

But this software does not work without dongle. What do you want to do with it?

 

[Parissan_Print]

 

[Parissan_Print]

But this software does not work without dongle. What do you want to do with it?

I have someone wants to give the dongle, but he also lost the disc

 

[Pauly]

You're not going to find printer drivers for it unless someone has the same software & printers you have.

 

[Parissan_Print]

You're not going to find printer drivers for it unless someone has the same software & printers you have.

I see.. thanks for your advise

 

[Pauly]

Recommend getting the latest version. or they now have a subscription based service which looks pretty good.

The oldest i had was X12. That and 21 are day and night difference. X7 is that much older that i believe it's a totally different software (X12 was the big revamp) it'll be about 12 years old.

 

[SignMeUpGraphics]

You'll also have the issue of being stuck with whatever drivers were available at the time (they came on the install CD back then) so you'll be stuck using only printers from the same era and nothing newer.

 

[Parissan_Print]

Recommend getting the latest version. or they now have a subscription based service which looks pretty good.

The oldest i had was X12. That and 21 are day and night difference. X7 is that much older that i believe it's a totally different software (X12 was the big revamp) it'll be about 12 years old.

Hi Pauly,

thanks for your recommendation. however, I'm tight on my budget so looking something I can afford atm

 

[Parissan_Print]

What is your printer and cutter make and model?

What are you looking for? Onyx Productionhouse 7.5.3. or Onyx Productionhouse 7.3.2?

Hi Monicolor,

My printer is HP Latex Z6100. The guy said the dongle only for 7.3.2 or lower.
thanks

 

[Bert Wondervan]

I'm going to search for you. I know someone who trades in new and used software. He always has the old CD. DVD, disk of the old software.

 

[jimdtg]

I have someone wants to give the dongle, but he also lost the disc

If you don't have Onyx's 7.3. driver package for Latex Z6100, that installation and dongle are useless.

 

[SignMeUpGraphics]

The Z6100 isn't latex... it's an aqueous photo printer. It won't print on solvent/latex vinyls and lifespan for outdoor prints on paper will be very limited.

 

[jimdtg]

The Z6100 isn't latex... it's an aqueous photo printer. It won't print on solvent/latex vinyls and lifespan for outdoor prints on paper will be very limited.

As my mistake, that is DesignJet series.

 

[Pauly]

Hi Pauly,

thanks for your recommendation. however, I'm tight on my budget so looking something I can afford atm

Have a look at Onyx Go, it's about $50(us) a month.
Otherwise, have a look at onyx's Entry level software. Starts from Rip Center, then Postershop.

If you're new to the printing world, you'll realise print software gets expensive fast.

Onyx is pretty much one of the best RIP softwares around. There's others out there but a lot are generally tied with printers (rolland & versaworks or mimaki and rasterlink)

i would definitely look at something new, that can grow with your business.
Old software, especially 10 years or more, is just far to old.