Need some help with a wireless bridge and NAS

[Notarealsignguy]

We have router 1 in the office with a seperate wireless bridge attached and a NAS, the shop has the bridge slave and router 2 inside connected to the bridge. I changed the IP address on router 2, made the name and password the same as router 1, turned off DHCP on router 2 (enabled on 1) and reset everything. In the shop I can connect to the network and have internet but it can not find the NAS. The PCs in the office are connected to router 1 and the NAS. My goal is to extend the network and have access to the NAS in the shop and office.
What have I missed? Computers aren't really my cup of tea

 

[weyandsign]

Put router 2 in access point mode.

 

[Notarealsignguy]

Put router 2 in access point mode.

It worked! Thanks so much!