Hello to All,
Have been reading and observing for about 8 months now, while trying to take care of business. Worked for Grimco for 5 years as a driver/warehouse and was drawn to the digital side of the industry. Met my business partner a sign vet. of 20 yrs. while delivering and we decided to start our own venture in fall of 2007. Bought a Mimaki system and have been doing fine to this point..."knock on wood", as repeat business is the best compliment a customer can give. Were bringing back customer service and our customers seem to be liking that concept along with a quality product.
So thank you, in advance for any constructive info and help we may receive from the wealth of knowledge here at Signs 101, look forward to returning the favor if and when possible.
Having an issue right know though regarding Korographics Abaco Beach, was just delivered today 1st time using this product. Mat'l is wavy (side to side) right off the roll. Have tried adjusting heat settings, head height to 6 and it "blows" giving a slight oversray effect, like static issue. Our room temp is 71 and the humidity is 70. Tried lowering head and had head strikes...printer prints great on other mat'l, so printer is working fine.
Any suggestions...as I need 1 banner finished by tomorrow with the balance due Friday. These are going in a retractable stand.
Thanks again!!
Rick
Have been reading and observing for about 8 months now, while trying to take care of business. Worked for Grimco for 5 years as a driver/warehouse and was drawn to the digital side of the industry. Met my business partner a sign vet. of 20 yrs. while delivering and we decided to start our own venture in fall of 2007. Bought a Mimaki system and have been doing fine to this point..."knock on wood", as repeat business is the best compliment a customer can give. Were bringing back customer service and our customers seem to be liking that concept along with a quality product.
So thank you, in advance for any constructive info and help we may receive from the wealth of knowledge here at Signs 101, look forward to returning the favor if and when possible.
Having an issue right know though regarding Korographics Abaco Beach, was just delivered today 1st time using this product. Mat'l is wavy (side to side) right off the roll. Have tried adjusting heat settings, head height to 6 and it "blows" giving a slight oversray effect, like static issue. Our room temp is 71 and the humidity is 70. Tried lowering head and had head strikes...printer prints great on other mat'l, so printer is working fine.
Any suggestions...as I need 1 banner finished by tomorrow with the balance due Friday. These are going in a retractable stand.
Thanks again!!
Rick
