Not printing

[Ste-v]

Hi guys I hope someone can help how can I pull ink through the printer head it’s not printing anything I’ve tried a clean and nozzle check and nothing
Thanks in advance

Steve

 

[garyroy]

Hey Ste-v, I don't know if I can help you but I would suggest if you are looking for advice that you may want to put way more information in your post that just 'not printing'

Maybe add Brand of Printer, Model, type of software (version number), how old is the printer? did it just happen? did you just change a head and it stopped printing?
You know, like going to a doctor. You don't just walk in and say 'need help', you sorta have to expound a little bit. Just sayin'

 

[Ste-v]

Yeah maybe I should’ve proofread it first ☺️
My printer is VJ 1304 I changed the dampers couple of days ago it all went straight forward old off new on did a charge on the ink just to refill now nothing printing, the ink in the tubes are practically empty I can’t seem to draw the ink down as you can see from the pictures any help is greatly appreciate
Cheers Steve

 

[netsol]

buy one of these

https://www.amazon.com/Yonligonju-Handheld-Motorcycle-Bleeding-Automotive/dp/B094CV2KPQ/ref=sr_1_2_sspa?crid=12A5G5W98Y5NV&keywords=handheld+vacuum+pump&qid=1672752484&sprefix=handheld+vacuum+pump%2Caps%2C95&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMlozVlBXRDZDTUEmZW5jcnlwdGVkSWQ9QTA5NjAwMjEzU1BESVE3QUZRNDNXJmVuY3J5cHRlZEFkSWQ9QTA0OTUxNTAyOUw3UTJJSjVRNTVVJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

or, if you are more patient than i am, get one of the tapered syringes from solventinkjet.com

the ink loves to pull back, hence the vacuum pump

 

[Ste-v]

So is that all I must do is pull it through?