Oki ColorPainter M-64s - System Error 2804 - Set LC INK CARTRIDGE

[Plotter-FIX]

Hey!

I am an tecnichan usualy for Mimaki, Roland, Epson and Mutoh Solvent printers. Now i got an M64s for free from a client.

When i start the machine without any cardridge it tells me to Set LC INK CARTRIDGE, even if all cartridges are outside.
If i put them in the System Error 2804 appears.

I tryed to start without all cartridges, no problem putting in them back, by black the error appear.
can´t get to it.

Can someone provide the service manual?
In case it´s a good machine with solid printheads, sad to throw it away.

Maybe it´s just possible to disable the chip readers?

Thanks for your help,
David

 

[Impact1]

System Error 280X: Ink Usage Upper-limit Error

If this error occurred, the related ink cartridge cannot be used with the printer anymore, even when ink remains inside. This error is caused by a defective part or sometimes caused by the improper ink usage, such as improper ink topping up.

To resolve the issue replace ink bag on line #5.

 

[Plotter-FIX]

Do you have the maintenance manual for me?
Which bag is #5?
is it possible to disable the Chip?

 

[MelloImagingTechnologies]

Replace the black ink

 

[Impact1]

Message me your email address and I will send you the manual. I am not aware of a away to disable ink chips.

 

[Dirty Curty]

Hey!

I am an tecnichan usualy for Mimaki, Roland, Epson and Mutoh Solvent printers. Now i got an M64s for free from a client.

When i start the machine without any cardridge it tells me to Set LC INK CARTRIDGE, even if all cartridges are outside.
If i put them in the System Error 2804 appears.

I tryed to start without all cartridges, no problem putting in them back, by black the error appear.
can´t get to it.

Can someone provide the service manual?
In case it´s a good machine with solid printheads, sad to throw it away.

Maybe it´s just possible to disable the chip readers?

Thanks for your help,
David

Did you get your issue resolved? I have a w64s and know of a series of buttons to press to reset on mine. Might work on yours..

 

[Plotter-FIX]

Would be great to know, i had no time for this issue until now... please tell me how...

 

[MelloImagingTechnologies]

I wanted to let you know of how to replace a cap on an OKI Seiko Colorpainter M-64s printer so I shot a video of how to do it.
I've taught a few of my customers how to do it so I created a video on how to do it quickly here on youtube -

I've also created a gear replacement to resolve a capping assembly issue concerning a plastic gear breaking.
Bruce

 

[costa]

o every one i have a hp8000s give error LC check ink 7. I cant find this error in any site. I change the cartridge i changed the sensors but still give me same error. Any one can help me??