Need Help Old Roland pnc-1000 cam 1 cutter....

[Vohaul]

Got one of these in the garage and am looking at getting up and running for a friend

What's the best os to use for this and can anyone point me in the direction of printer drivers / software for this...

I'm pretty sure versaworks for my xr-640 won't work... lol

Cheers
Paul



Sent from my iPhone using Tapatalk

 

[Customprinted]

im using flexi cut in windows xp with a usb to centronics cable

Sent from my SM-A510M using Tapatalk

 

[jimdtg]

FlexiSIGN, Signlab supports your machine.
OS platform should be Windows 7.

 

[Vohaul]

Anyone know where I could find a copy of dr. Stika?..... still playing with this old machine....

Thanks
Paul


Sent from my iPhone using Tapatalk

 

[jimdtg]

Which Windows platform are you using there? Dr. Stika has very old age that I may not work on all Windows.

 

[Roland Product Support]

Hey Vohaul,

Dr. Stika is freely available for download at our website here: http://support.rolanddga.com/docs/D...Technical Services/Downloads/DrStika_Plus.exe

After that’s downloaded and installed, it’s recommended to download and install the Dr. Stika updater utility from here: http://support.rolanddga.com/docs/Documents/departments/Technical Services/Downloads/stikap.exe

If you have additional questions or need extra support directly from Roland corporate support, please submit an "official" support request form online here: https://www.rolanddga.com/support/product-support-form

If you do write us, we look forward to helping you and take care,

Roland Technical Support
Roland DGA Corp.
rn

 

[Ian Stewart-Koster]

"the Best O/S?" You can use Win 98SE, Win XP, or Win 7 with no problems.
If you have Corel Draw, you can plot directly from it - there is a bit of a learning curve, but no problems,
It's a noisy machine - we have two, and the manual & service manual. We also have a PNC1410 that is 100 times better, so that's what gets used... plus a Mimaki that's better again...
But the old Camm-1s were built to last.