Omega output to envision plotter

[signage]

I have a question for Omega users and their plotter setting for the envision! What I would like to know is do you let the software do the settings for material, force and speed or do you set it everytime you change material/plot? What I have been doing is setting it manually and was wondering what most others are doing, and if you let the software do it are you having any problems? TIA

 

[Fred Weiss]

I let the software do it 99.9% of the time. This, of course, ties in with choosing appropriate vinyls and foils in Composer, even if I am using non-Gerber materials. I then supplement that with a filled in job description that details the materials used in the job.

 

[WhiskeyDreamer]

same as fred....the only time i really change things is with a specialty material that isn't in gerber's material list....

 

[mrmoto95]

same as fred....the only time i really change things is with a specialty material that isn't in gerber's material list....

I do the same as above. Unless the the blades is getting dull and I am to
cheap/lazy to change it.

 

[GB2]

I also let the software make the proper selections and have never encountered a problem.

 

[signage]

Thank You all for the info!