Will do WHAT very quickly? We run max impact on 99% of our prints for years and never have bleeding ink....it was most likely a piece of dust on the bottom of the print head grabbing spray from the nozzle then dripping.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Only had my VersaCamm for a week, but seeing issues with Red showing as Orange.
- Thread starter Lunatic Taskbar
- Start date
Will do WHAT very quickly? We run max impact on 99% of our prints for years and never have bleeding ink....it was most likely a piece of dust on the bottom of the print head grabbing spray from the nozzle then dripping.
DizzyMarkus
New Member
We have only found a need for it on some full cover banners. You might be right, however we have never seen "drops" in regular pre press.. Just my experience tho :0)
Markus
Markus
NoMovingParts
New Member
Glad that worked out - we were having the exact same issue in my shop - (minus the bleeding!)
Worked out for us too after following the suggestions - thanks!
NMP
Worked out for us too after following the suggestions - thanks!
NMP