Onyx 11 - How to print non-consecutive PDF pages?

[MikeyG]

Hi there to you all!
Just had Onyx RIP installed - running three different large format printers.
(Previously been using Shiraz.)

Finally getting to grips with Onyx's little ways...

However, I don't seem to be able to find a way to print non-consecutive pages of a PDF.
For instance, I may want to just print page 2,4 and 6 from a 10-page PDF.

I know that in 'Job Editor', in the 'Preview and Size' tab, I can specify "1/All" to print all the pages, or just set a number to print just one of the pages.
But I'd expect to be able to type in "2,4,6" or "2/4/6" or something, to be able to just print those pages. At the moment, I'm having to specify just page 2 and submit it. Then doing the same for page 4 and submitting that, and so on. Then printing with "Group Jobs Together" selected.

I also know that in the "Layout" tool I can turn off different pages within a PDF document. This would do fine, but I can't specify a gap between the images! The 'Minimum Spacing between Images' is set to 0.3cm and is greyed out so I can't alter it!

Any advise or help welcome! Thanks!

 

[SignMeUpGraphics]

When I need to do this, I'll run the PDF through Acrobat and extract the required pages into their own file.
Couldn't find an easy way to do it through Onyx either.

 

[Bly]

Rip the whole lot then right click in RipQueue and select Edit > Tiles.
Turn the ones you to print on or off.

 

[SignMeUpGraphics]

Wow, certainly didn't even think to look there to try do this.
Excellent tip.

 

[MikeyG]

That's fantastic!
I thought there had to be a way (it would have been ridiculous if not!).
As 'SignMeUp' said, I'd never have though of looking there, either!

Thanks so much for the help!