• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Onyx Epson Edition

Notarealsignguy

Notarealsignguy

Arial - it's almost helvetica
What are the limitations of using the Onyx RIP that is included with the Epson S series printers? Can it create OPOS marks and output for a Summa? I contacted Epson and they said it should but they don't know.
 
Boudica

Boudica

I'm here for Educational Purposes
Notarealsignguy said:
What are the limitations of using the Onyx RIP that is included with the Epson S series printers? Can it create OPOS marks and output for a Summa? I contacted Epson and they said it should but they don't know.
Click to expand...
It does for me - you just need to add the summa as your cutter in Onyx.
 
balstestrat

balstestrat

Problem Solver
I doubt it has that much limitations. You just get postershop or ripcenter locked to Epson models only.
Roll cutters always work.
 
Notarealsignguy

Notarealsignguy

Arial - it's almost helvetica
I read a different thread where CanuckSigns mentioned that it doesn't come with a cut server. I believe the Epson comes with gamma print but I can't figure out all the ins and outs of what Onyx actually has
 
Boudica

Boudica

I'm here for Educational Purposes
When we first got our Epson, we just had onyx postershop, and if I recall it did have cut server. We didn't have the summa yet, but we had a roland cutter, that I could print on the epson and use cut server to cut on the roland.
 
balstestrat

balstestrat

Problem Solver
If this is up to date which it does look like, it will have full roll cutter support.

ONYX RIPCenter EPSON Edition - Onyx Graphics - RIP Software for wide-format print

Welcome to the solutions voucher program page: Designed specifically for your new EPSON SC-S40600, SC-S60600, or SC-S80600 printer. Since 1989, Onyx Graphics has been leading the wide-format print industry in RIP speed and print workflow automation with the proprietary ONYX Color engine for...
onyxgfx.com onyxgfx.com
 
Notarealsignguy

Notarealsignguy

Arial - it's almost helvetica
balstestrat said:
If this is up to date which it does look like, it will have full roll cutter support.

ONYX RIPCenter EPSON Edition - Onyx Graphics - RIP Software for wide-format print

Welcome to the solutions voucher program page: Designed specifically for your new EPSON SC-S40600, SC-S60600, or SC-S80600 printer. Since 1989, Onyx Graphics has been leading the wide-format print industry in RIP speed and print workflow automation with the proprietary ONYX Color engine for...
onyxgfx.com onyxgfx.com
Click to expand...
Will it do summa barcodes? The whole Thrive upgrade sales pitch at the bottom makes me nervous. If this will do everything needed, what's the need for Thrive?
 
balstestrat

balstestrat

Problem Solver
Notarealsignguy said:
Will it do summa barcodes? The whole Thrive upgrade sales pitch at the bottom makes me nervous. If this will do everything needed, what's the need for Thrive?
Click to expand...
Yes it will.
Thrive.. more printers mostly and full color management etc. Stuff you don't need. Grand printers, network license yada yada.

Don't worry, you will be just fine with that Epson edition.
 
Last edited:
Saturn

Saturn

Your Ad Here!
Seconding Boudica, I use the free Onyx/Gamaprint they gave me with my 80600, I think version 18 or 19. It adds Summa marks and barcodes to everything I print, but I DO use Summa Cutter Control to drive my two cutters with the files Onyx creates. Easy peasy.
 
Notarealsignguy

Notarealsignguy

Arial - it's almost helvetica
Saturn said:
Seconding Boudica, I use the free Onyx/Gamaprint they gave me with my 80600, I think version 18 or 19. It adds Summa marks and barcodes to everything I print, but I DO use Summa Cutter Control to drive my two cutters with the files Onyx creates. Easy peasy.
Click to expand...
Do you output the cut file from Onyx to a staging/hot folder for the cuts? Dumb question, does it name the cut file because using the corel plugin with gosign, it outputs it as "output.plt" which requires another step of opening the folder and renaming it which is annoying. Unless I am doing it wrong?
 
Saturn

Saturn

Your Ad Here!
Notarealsignguy said:
Do you output the cut file from Onyx to a staging/hot folder for the cuts? Dumb question, does it name the cut file because using the corel plugin with gosign, it outputs it as "output.plt" which requires another step of opening the folder and renaming it which is annoying. Unless I am doing it wrong?
Click to expand...
Yup. Saves to a Google Drive folder that shows up instantly on another computer that SCC grabs from. The files are just sequential gibberish, but match the text next to the printed barcode—one each for the "top" and "bottom" codes.
 
Notarealsignguy

Notarealsignguy

Arial - it's almost helvetica
Saturn said:
Yup. Saves to a Google Drive folder that shows up instantly on another computer that SCC grabs from. The files are just sequential gibberish, but match the text next to the printed barcode—one each for the "top" and "bottom" codes.
Click to expand...
I guess with barcodes it wouldn't matter what the name was since it is all auto, wasn't really thinking there.
 
You must log in or register to reply here.
Top