oring broke need new one

[klingsdesigns]

I have a vp-540 and noticed one of my orings was missing. It broke and fell below. I also noticed another one is pretty cracked up and ready to go. Do you know where i can get replacements or know what size this is so i can shop around an get 4 new ones.
Otherwise i will just remove one and go try and find one at the hardware store.

Thanks!!

 

[signrios]

same thing happened to my vp540
seems cheap and silly but i just wrapped some vinyl in place of the oring,
it is still working after almost a year
let us know where you find them please

 

[J Hill Designs]

seems to just be a 'tie-down' of sorts

 

[Robert M]

O-rings

We have them at www.solventinkjet.com. We have them for both 2 and 3 mm ink line. Rule of thumb, small dampers take 2mm and large dampers take 3mm, except for the JV3, which is 2mm
call if you have a question
800-328-1306

 

[klingsdesigns]

We have them at www.solventinkjet.com. We have them for both 2 and 3 mm ink line. Rule of thumb, small dampers take 2mm and large dampers take 3mm, except for the JV3, which is 2mm
call if you have a question
800-328-1306

Its the o-ring to hold that metal rod in place. I dont see them on your site.

 

[InkjetAuction]

Zip tie

In these cases I use a small zip tie as a retainer... simply snip it off if you need to pull out the axle for whatever reason.
I see this at least once or twice a week.

~E

 

[klingsdesigns]

In these cases I use a small zip tie as a retainer... simply snip it off if you need to pull out the axle for whatever reason.
I see this at least once or twice a week.

~E

sounds good thanks!

 

[OldPaint]

cheap way to go..........
http://www.hsn.com/products/o-ring-...ferralID=e6cde60c-5574-11e4-a1c0-001b2166c2c0

 

[klingsdesigns]

found some at farm and fleet.. got it all fixed up.. thanks everyone.