Overcut In Versaworks?

[jeffkics]

Is there a way to overcut in versaworks so the cutline goes a little bit past the starting point? So those spots don't pull.

I posted in General Software and then saw Roland. Sorry. (didn't get a response over there)

 

[phototec]

This is a GOOD question, I don't have the answer, but very interested if there is a way to do this?

 

[ProPDF]

Curious also.

 

[jeffkics]

Flexi has this option in the Production Manager, 4th tab, and check overcut. Hoping versaworks can do it somewhere.

 

[Mysticalvibes]

I use Versaworks on a daily basis and have never found that option, even in the new Versaworks dual. We've a new gr640 coming next week and apparently it does it using "cut studio"

Sent from my Moto G (4) using Tapatalk

 

[Roland Product Support]

Hey jeffkics,

Overcut is a feature of the Roland cutter, such as the Roland GR series of cutters, not the Roland software (e.g VersaWorks, CutStudio). To find out if your cutter (or print/cut device) supports overcut, just check the user manual and specifications for your machine. We hope this confirmation helps in some way.

If you have additional questions or need extra support directly from Roland corporate support, please submit an "official" support request form online here: Product Support Form | Roland

If you do write us, we look forward to helping you and take care,

Roland Technical Support
Roland DGA Corp.
rn