paint protection film / clear bra nose guard template source

[scott pagan]

i'm looking for a source for a 2014 Subaru Imprezza STI (5-door/hatchback) PPF file. i have the film and so rarely get request for a full front bumper, and partial hood -that i just want an accurate file to cut, apply, and move on. does anyone offer one-off files? we mainly use blocks or strips of PPF for basic protection areas and have not had contoured diecut pieces to work with.

 

[toodark]

I think you can purchase single files from here. autographicstoolbox.com

 

[S'N'S]

Haven't checked if they have the one you want ... http://www.patternworx.com

 

[S'N'S]

Try google images, type in paint protection templates.

https://www.google.com.au/search?q=...DoDA&ved=0CAYQ_AUoAQ&biw=1525&bih=705&dpr=0.9

 

[Bly]

We haven't offered paint protection films before but it could be a good addon to wraps.
What kind of films are you guys using & how hard is it to install?
You have to apply wet don't you?

 

[S'N'S]

We haven't offered paint protection films before but it could be a good addon to wraps.
What kind of films are you guys using & how hard is it to install?
You have to apply wet don't you?

I don't do them, but I have been thinking about it as there isn't anyone around here doing them. I've watched a few videos of installs and looks fairly straight forward if you can get the template otherwise a little mucking around making one.

 

[striper14]

if you can get a template they're okay but if you have to repair panels that have been cut directly on the car or if you are going to try it that way, they're a nightmare so run away...fast

with the template, applying wet works well cos you dont have to cut the material, just gently heat to get it to form round the curves & dry enough to stay flat

without a template & trying to cut directly on car...well for a start it takes ages for it to dry enough to cut without sliding around. Using a heat gun just seems to create bubbles & its very easy to get stretch lines when you're trying to shape to a curved guard. And the smallest piece of dirt can stuff the whole panel. You are usually dealing with expensive cars & fussy owners...its a job i avoid if possible

cheers

 

[scott pagan]

Thanks for all the replies. The patternworx site has what I am after. Signs101 always has the best tips!

...usually dealing with expensive cars & fussy owners...its a job i avoid if possible

My thoughts exactly, but it's for a good pal so I want to help and offer the best job I can.