Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Panelling Question

Discussion in 'Flexi' started by RiXaX, Feb 16, 2007.

  1. RiXaX

    RiXaX Member

    Aug 17, 2004
    Mendocino, CA
    When I have a large piece of sandblast resist to cut, sometimes I send it to the cutter in panels so that long passes of heavy material are not making long passes. What I'd like to do is to be able to select columns as well as the panels and have the end results be ready to weed and apply with everything where it should be as if it were all cut as one file sent to the cutter. Anyone know what I mean, or how to do it????
  2. cinemasign.grafix

    cinemasign.grafix Member

    Aug 14, 2005
    All the settings to preform the actions are in production manager. And an outline of working with tiles & panels are in the manual. You may have to send the file (send as separate jobs or hold in list) and turn off advance after plot. You question is a little vague as to what part of the job your having a problem with.

Share This Page