Perf wrap on a honda element quarter window

[john1]

Hey guys, Wondering if perf will go around the little bend on this honda element window on the side fine. The perf will have cast lam over it.

Thanks!

 

[BigfishDM]

It should but if you use the 3M it will no problem as its a cast vinyl. I think it should be ok.

 

[Aklaim]

Yes it will. Did an Element about 3 months ago. Just make sure you seal the edges of the perf.

 

[john1]

Sounds good, What are you sealing the edges with, clear lam strips?

Thanks!

 

[Aklaim]

3M 8914es Sealing tape. It's $11 a roll from Fellers and works great.

 

[john1]

Are you trimming the pef back 1/4" then applying it?

I would think cast optically clear lam strips would work also, No?

 

[Aklaim]

Yes we trim it back. And yes lam strips would work just as effectively. We used to do that, but it's just more convenient for us to have a few rolls on hand especially at the price point of $11 a roll.

 

[john1]

Awesome, How are you trimming it back, like whats the method to do it?

Thanks!

 

[ProWraps]

there is a perf trimming tool in the fellers catalog that uses and olfa knife. or you can just use two olfa knives held together.