Need Help Plastic Husky Bins + Signs

[TreasureBox]

Need some advice or suggestions. I have a client who wants to attach some small styrene signs to these bins. Looking for a permanent solution

Thanks

 

[Christian @ 2CT Media]

Rivets! Drill holes and rivet it in.

 

[jfiscus]

Will VHB stick to them? You could print on a vinyl like Arlon DPF8000 and just stick the vinyl directly to them.

 

[rjssigns]

Lamacoid tag with rivets. I used that process on some gun cases approved for airline travel Client was stoked.

 

[2B]

rivets for a visual
hidden, a combination of foam VHB and contact cement / epoxy

 

[TreasureBox]

Great, thanks for all the suggestions!

 

[signage]

Lamacoid tag with rivets. I used that process on some gun cases approved for airline travel Client was stoked.

I've always known them as Phenolic

 

[MNT_Printhead]

I would use Killer Red tape.

 

[TreasureBox]

I would use Killer Red tape.

Haven’t tried this product. I’ll order some. Thanks

 

[Don McCormick]

With people putting their shoes in and out, the sign will be hit constantly. Even if the styrene holds-up, it will have to be cleaned on a regular basis. I would recommend a solution that mounts the sign above the bin— so the shoes do not come into contact with it. You might be able to just have one sign to serve all 3 bins too.

 

[TreasureBox]

With people putting their shoes in and out, the sign will be hit constantly. Even if the styrene holds-up, it will have to be cleaned on a regular basis. I would recommend a solution that mounts the sign above the bin— so the shoes do not come into contact with it. You might be able to just have one sign to serve all 3 bins too.

Hi Don, I completely agree. This was my first suggestion to the client. The picture shown is not where the bins will be though. He didn’t think that would be a good solution since he will be moving them around depending on different events/parties etc.