Need Help primer for magnets digital printing

[al mengel]

I'm printing on magnet material with a JFX200 mimaki and get pretty good adhesion using Kolorcure primer, but when to go cut these magnets on our Colex cutter the ink slightly chips off of the edges. Are there any primers out there anyone uses that are really good or specifically for magnet material that dont cost an arm and a leg?
thank you

 

[brycesteiner]

I'm printing on magnet material with a JFX200 mimaki and get pretty good adhesion using Kolorcure primer, but when to go cut these magnets on our Colex cutter the ink slightly chips off of the edges. Are there any primers out there anyone uses that are really good or specifically for magnet material that dont cost an arm and a leg?
thank you

I'm not exactly familiar with that, but I use Digimag and print directly to it without any primer and it works just fine.

 

[Bly]

Can you kiss cut through the ink before through cutting the magnet?

 

[FireSprint.com]

You might try some of the primers from Fuji, maybe ZE-1000?