Printer profiles for Epson S60600

[Mata]

Hi

Does anyone on here have an Epson S60600 and wouldn't mind sharing some of their printer profiles for Onyx.

What do you use for Wrap Films? T-Shirt Films? Standard vinyl? etc

I have made a couple of profiles as the ones I found online were terrible but I get stuck on what resolution I should print at. It would be nice to do print tests to find out how the printer prints in that resolution before making the profile.

If using the Epson Workflow, you have 6 to start off with straight away

360@720x720
360@720x1440
360@1440x1440
720@720x720
720@720x1440
720@1440x1440

Then you have the passes to add to that

360@720x720 - 2 pass, 4 pass, 4 pass HQ
360@720x1440 - 6 pass, 6 pass HQ , 8 pass, 8 pass HQ
360@1440x1440 - 12 pass, 16 pass
720@720x720 - 2 pass, 4 pass, 4 pass HQ
720@720x1440 - 6 pass, 6 pass HQ , 8 pass, 8 pass HQ
720@1440x1440 - 12 pass, 16 pass

What does the 360 and 720 at the beginning mean?

I thought If I had a some good test profiles, I could have a look at what they're doing.

Not many make profiles for the S60600

 

[Pauly]

get a generic profile that has a lot of the print modes and test them out on a media and see what they produce.

i could be wrong, but the extra passes might be for a higher density.

the first number i believe is suppose to be the resolution according to my little desktop epson.

 

[Mata]

Thanks. DId that and now playing about with that.

 

[Solventinkjet]

Usually when you see HQ next to the passes it means it turns the motor speed down.

 

[a77]

Usually when you see HQ next to the passes it means it turns the motor speed down.

That is useful info for sure! Didn't know that. Our customer profiles are "HQ", I will try a non HQ and see if we can get more speed.