• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

printing purple tent

D

dortonracing

New Member
ok so when i try to print silver/gray it trys print a purple tent. I printed up some carbon fiber and where its suppose to be silver its purple and it a fill off of monster wraps, and then even in some brush aluminum it looked purple tented. i will attach a pic as well.
 

Attachments

  • imagejpeg952_3.jpg
    imagejpeg952_3.jpg
    55.6 KB · Views: 96
L

laserman70

New Member
Dont know what printer you are using.
We have a different profile setup for printing large scale grays.
We had the same issue, tried everything and only thing we found that worked was to create a profile for grays..
Good luck
 
AUTO-FX

AUTO-FX

New Member
Last time I had this problem, I went in and knocked the [magenta and cyan] channels down 10% at the high end and it printed nicely. Actually, I had a green tint, so I adjusted the cyan and yellow.
 
You must log in or register to reply here.
Top