problem mutoh 1324

[yaniv2h]

Hello everyone
I have a problem that streaks appear in the blue color (as in the picture)
There is a new head
Attached nozzel chack normal
I would appreciate help with anyone encountered

 

[Impress Auto Styling]

Have you tried performing a bidi calibration and PF calibration?

 

[unmateria]

That kind of stripes are usually defective or old media, or vacuum too high (the surface of media become weavy... Not plain). First try a paper media with no vacuum. If it keeps doing it, clean encoder and proceed to the bidir calibration (check manual)

 

[Solventinkjet]

Try cleaning the encoder strip. It could be many things but that's my first thing to check usually.

 

[jcskikus]

Try cleaning the encoder strip. It could be many things but that's my first thing to check usually.

Encoder strip and change profiles to see if any change.

 

[yaniv2h]

Have you tried performing a bidi calibration and PF calibration?

Yes and it only happens in the blue color

 

[yaniv2h]

Have you tried performing a bidi calibration and PF calibration?

I did the calibrations it didn't help

 

[unmateria]

Hi Na, bad bidir calibrations looks different. Did u check vacuum and replacing media? If vacuum and replacing media doesnt help, try to use a lower printhead distance to the media.