Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Production Manager Freezing at 25% Printing

Discussion in 'Flexi' started by Knep, Aug 21, 2010.

  1. Knep

    Knep Member

    206
    7
    18
    Jan 30, 2010
    Indidna
    Version 8.1 pro....was working fine, now I send a file through to my printer, and it never gets past 25%...and the printer never starts but does say recieving port, left it on overnight and it still did not finish...anyone have any ideas?
     
    Tags:
  2. CS-SignSupply

    CS-SignSupply Very Active Member

    Power off the printer, shutdown and restart Flexi. Restart the printer and open production manager... Go to Setup>Test Print

    See if it does the test print from the software.

    If not, Reset the Preferences to Default and setup the printer again.

    Question: same file keeps freezing or all files sent?
     
  3. CS-SignSupply

    CS-SignSupply Very Active Member

    duplicated post... sorry
     
  4. Knep

    Knep Member

    206
    7
    18
    Jan 30, 2010
    Indidna
    That did the trick! I restarted several times, but never thought about powering off the machine!
     
  5. CS-SignSupply

    CS-SignSupply Very Active Member

    Glad to hear all is good now.
     
Loading...

Share This Page

 


Loading...