Production Manager Setup Problem

[downer22]

Hi, I am new to this forum and new to the world of Vinyl Graphics. I am using FlexiSign 8 and Production Manager with my new Graphtec CE5000. I am having a problem sending jobs to the cutter. When am in Production Manager and use the "Test Cut" feature, the plotter starts to cut a string of small number, letters and ":". I turned the plotter off so I would not waist my vinyl so I don't know how long it was planning on printing/cutting those characters. I also have Cutting master 2 installed and have tried to use "Test Cut" from there and it cuts the test pattern fine (box with a circle in the middle).

What am I missing in the setup of Production Manager or the plotter that is causing this? Any help would be appreciated. Thanks in advance.

Thanks,
Gregg

 

[signage]

Change the language on the cutter to HPGL and try it!

 

[Stealth Ryder]

Welcome to a great forum...

 

[downer22]

Thaks for the quick reply. I will try that tonight when I get home.

 

[downer22]

That was it. I am now up and cutting. Thanks for your help.