Profil creation with Digital Factory DTF edition

[diltech]

Hi,

I want to know if i can create my own profile with Digital Factory DTF edition.

I use with Mimaki TXF-300
Thank

 

[Graphic Extremes]

you can create your own profiles for any printer that I have seen so far.

 

[diltech]

I already have an X-RITE measuring device that seems to be compatible, but I can't find the module to create profiles. Is there a tutorial on the web that shows how to do this? Thanks.

 

[Graphic Extremes]

You have to buy an add on for Digital Factory, they say you can just use x-rite to make a profile and use it in Digital Factory

if you go to their website, and look under modules you will see IC Profiling it list for 895.00 or just try and do it with the X-Rite and use the profile it generates

DIGITAL FACTORY - Fiery Specialty Production

More than just RIP software, Digital Factory offers high fidelity color printing and professional job preparation and management tools to streamline your production workflow from start to finish.

www.cadlink.com

 

[hybriddesign]

We have TXF 300s, cadlink and an x-rite as well. We made some profiles in a demo of Printfactory and it worked pretty well but we just haven't had time to keep up and actually use them so we're back to digital factory. Printfactory did seem to have a little wider gamut but the workflow was a little confusing. It's $89 or $99 a month or something and can do automated half tone printing.

btw, how is your TXF holding up? We have two and one is a workhorse but throws fits some days and the other has been down for half a year.