Publish to PDF

[ndemond]

I have a 3 page corel draw file the work space size is 20' x 15' (page size). When I publish to pdf I am getting 3 blank pages. Do I need to shrink my drawings to fit and 8.5" x 11" piece of paper. (i don't want to do that I would like to keep them at full size.) What am I missing here.

Thanks Nancy

 

[J Hill Designs]

I think the pdf page size limit is just below 240" - I had problems outputting a 20' banner once

edit: yeah 200" liimit on pdf page size

 

[gnemmas]

In Corel, need to change page size accordingly. Default is 8.5x11",if nothing falls in the area, you get blank.

 

[ndemond]

I think the pdf page size limit is just below 240" - I had problems outputting a 20' banner once

edit: yeah 200" liimit on pdf page size

Thank you will try!




Nancy

 

[cdiesel]

One of the settings is also "current document" or "selection". Make sure it is set to current document. Also, all of your design elements must be on the drawing page.

 

[Service Sign Co]

http://www.corel.com/servlet/Satellite?pagename=Corel2/Products/Content&pid=1047022690654&cid=1

Here's some info that may be of use. I usually work toa scale in Corel mainly when you need to e-mail clients or your PC doesn't have a lot of memory. If you send files to be printed and use the scale with the blend effect,don't forget to increase the blend according to scale,