WhiteLightning
New Member
Have a Gerber En Vison 375 which takes the punch vinyl. I have a bunch of unpunched vinyl, some of it came with it, I'm wondering if there is a way I can run it? If so how?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Punch and un punched
- Thread starter WhiteLightning
- Start date
Fred Weiss
Merchant Member
Create a carrier sheet to which to tape the unpunched vinyl. You can use any piece of punched film. We prefer the Edge Positive film as it's very durable, clear and sturdy.
Tape your unpunched film with the release liner intact with masking tape on the square to the carrier sheet. Smooth the film so the finished piece is perfectly flat as you tape it. Be sure to leave an untaped gap at each corner so any air will escape as it moves through your plotter.
Tape your unpunched film with the release liner intact with masking tape on the square to the carrier sheet. Smooth the film so the finished piece is perfectly flat as you tape it. Be sure to leave an untaped gap at each corner so any air will escape as it moves through your plotter.