I've got a Purex 200 system that seems to not be working properly. When I turn it on the system turns on and the blower starts, shows the airflow getting up to the set flow, but the fumes are still there and there is nothing showing in the 3 columns (blockage, particulate, chemical) like it used to when it was turned on. I've got it hooked up to a Seiko w64s running a 1300sqft job and the fumes are starting to build up. I've checked the hoses and there are no blockages in the hoses... the filter seems fine... and I'm lost now.
Chaz
Chaz
