darkknightt
New Member
Hi fam. I got problem with update from RL Pro 5 IP to RL6 Plus. My printer is UJF-3042-HG (firmware 4.50)
I can't set up simultaneous print for whole composition. I used to be able to print primer/white/color together at once from top to bottom, now I only can print 3 separate layers which consume much more time I believe.
I set it to speed priority as mentioned in manual, but still, it doesnt work.
Could someone help me?
I can't set up simultaneous print for whole composition. I used to be able to print primer/white/color together at once from top to bottom, now I only can print 3 separate layers which consume much more time I believe.
I set it to speed priority as mentioned in manual, but still, it doesnt work.
Could someone help me?