RE: Tech Ink Profile

[Gurupreet Dhanjal]

Hi Guys,

I recently switched to techink on my vj1204, the problem i am having is that the prints are coming out dull and lack vibrance, can anyone advise where i can get the icc profiles for the ink, i am using onyx rip 7

Thanks

G.D

 

[MachServTech]

Hi Guys,

I recently switched to techink on my vj1204, the problem i am having is that the prints are coming out dull and lack vibrance, can anyone advise where i can get the icc profiles for the ink, i am using onyx rip 7

Thanks

G.D

Really best to just build your own and teach yourself a little about color management. Sounds like you could have the wrong source profile and rendering intents set.

 

[astro8]

I've never seen profiles for Techink, had to build my own. The yellow is very dark, the cyan & black is deep, the magenta a little weak so without profiling the output was dull with a green gray cast.

 

[Jet Fast Printing]

Really best to just build your own and teach yourself a little about color management. Sounds like you could have the wrong source profile and rendering intents set.

Could not agree more. It's a little time consuming. But you will like the results!

 

[Gurupreet Dhanjal]

Sorry guys but i am a complete novice when it comes to color profilling, can anyone give me pointers, a kind of how to color profile for dummies,

Any help will be much appreciated.

 

[Jet Fast Printing]

It's quite a read, but here is the "how-to"

http://www.onyxgfx.com/uploads/MMPG_111808.pdf?dl

Good Luck!! Yell if you need any help

 

[Stealth Ryder]

Why not use inks that have already been profiled and time tested...

 

[messmedia]

Well. I got an offer once, for SIGNRACER - mutohs with techink inks.
I did not buy it, but here is a link for company who sells them - They said they have profiles for all the materials they sell so, perhaps they would be able to help You. So, link is: http://www.leykom.hr/
Now, site is not on English language, (it is Croatian company) but, U have contact-form here: http://www.leykom.hr/default.aspx?id=42, and at the left of that page U have a phone, and e-mail, so - perhaps U could make some arrangement with them.
Hope this can help You ...