Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Replacing Mimaki CJV Cut Carraige and Mechanical Drawing?

Discussion in 'Mimaki' started by Blake Shiman, Mar 15, 2020.

  1. Blake Shiman

    Blake Shiman New Member

    1
    0
    1
    Apr 25, 2019
    Iowa
    Hey guys, thank you for taking the time to read this. First off, just wanted to say thanks to everyone for their support and help.

    We are using a Mimaki CJV30-130 and I'm having trouble finding any parts catalog/mechanical drawing. The specific part(s) I am looking for right now is an entire cut assembly/carriage as well as the individual parts that make up the entire assembly. I have spent quite a while searching for this and there doesn't seem to be much information out there.

    I am hoping to find a mechanical drawing of the entire machine and the individual parts so that in the future, I can more easily locate replacement parts.

    As for the cut assembly, I found these two products and I'm confused on what they are. It would make sense that the "Cutter assembly" is what I'm looking for but I've also heard it referred to as a "Pen assembly". If anyone could shed some light on this for me, I would appreciate it.

    Just to be clear, I attached a picture of the exact part I'm talking about as well as two links to the cutter assembly and pen assembly.

    Thanks again for your time!

    [​IMG]

    Cutter Assembly ($165):
    https://www.grafxnetwork.com/ProductDetails.asp?ProductCode=MIM-E105370&CartID=1

    Pen Assembly ($350):
    https://www.grafxnetwork.com/Mimaki-CJV30-Pen-Assembly-p/mim-m008291.htm
     
Loading...

Share This Page

 


Loading...