Replacing Print Head

[pabacker66]

I am getting HORRIBLE overspray on my prints and I have tried everything to fix it, to no avail so I have ordered a replacement head. I had to replace the black print head a few months ago, so I am comfortable and familiar with the process and don't have a problem with that. It's just that I cannot decipher whether it is my cyan or light cyan as the test print looks fine. How to I figure out which is the culprit?

 

[CS-SignSupply]

If you can get into Service Mode, run the INK FILL PATTERN. This will fire 100% from each color and print individual 1.24" bands for you to view.

 

[pabacker66]

Thanks for the quick reply. That sounds like it will do the trick. Thanks.

 

[CS-SignSupply]

No problem. Call if you need a little help.

 

[pabacker66]

That worked perfectly. It was my light cyan. Thanks again for the help

 

[CS-SignSupply]

Keep us in mind if we can help in the future.