Replacing vinyl in a retractable banner stand.

[Aardvark Printing]

What's the best adhesive to use in replacing a 10 mil smooth vinyl in banner stand?

 

[Billct2]

Hope that it's a quality unit then Youtube the brand for pointers

 

[Gino]

He's spot on............................

 

[Boudica]

Pull the banner all the way out and lock it before taking the top bar off.

 

[ikarasu]

Use banner tape.

We cut the banner off right at the edge and tape it to the banner... The original material the banner gets taped to rips very easy, so going banner on-top of banner allows you to do more changeovers.

 

[GAC05]

We just use a scrap of Ij35c about 5" or 6" along the bottom edge. Once there are a few wraps around the winder the tension will keep it in place. Works every time - costs nothing.

 

[Hazzmatte]

Ya……I scape it and sell them a new banner stand.

 

[Aardvark Printing]

Thanks for all the replies.

 

[Hot Vinyl]

I do the tape along the bottom. But I agree make sure it is locked before you take off the top bar.

 

[darlin]

I remove old manner, apply Tesa banner tape Y reinstall new banner. If its sticky , I cover with clear packaging tape

 

[EmilyAlice3]

I've actually had success using 1" double sided tape from Uline. I wedge an allen wrench in the key slot to keep the banner from retracting while I work. There is a great tutorial on youtube.

 

[Kemik]

Banner tape, and/or a scrap piece of vinyl front and back for extra hold.

 

[White Haus]

Packing tape on both sides. Almost free + quick and easy.

 

[Boudica]

What's the best adhesive to use in replacing a 10 mil smooth vinyl in banner stand?

Banner tape.