Reverse Print Decals

[MARSERdesigns]

I was a approached by a client that wanted some die-cut decals that were reverse printed. Not sure if anyone is familiar with the GoodGuys Hot Rod Association decals, but some of them were reverse printed. He has a decal that is similar to that he wants printed.

I know this is the wrong place to be asking for a company that can help me out, so forgive me!

 

[rushworks graphics]

most merchant members on here could help you with that no problems, it should be easy enough to do. we do this often so, i'm sure the mm can help with quoting you.

 

[MARSERdesigns]

thanks!

 

[Aklaim]

Reverse print on clear, and back it with white? That's how we do them.

 

[CanuckSigns]

a Gerber Edge would do a very nice job on these decals

 

[Letterbox Mike]

Are you looking for advice on how to produce them in house or a merchant member to do the job for you? We do them all the time, so let me know if you need a quote.

If you need to know how to do them in house, it's fairly simple. If that's what you're after I'll try to post how to.

 

[rushworks graphics]

a Gerber Edge would do a very nice job on these decals

thats what we use.....and there are mm on here with that machine.

 

[TXFB.INS]

Afternoon,

the production guy is and I'm in charge needless to say it has not been a smooth Friday for me.

our VS-640s' are set up with no white, but I have an order of reverse print decals that are to placed on the inside of vehicle windows and be seen from the outside.
The image is not needed to be seen from the inside.

Can this be done without white?

if not which MM do them?

thanks

 

[J Hill Designs]

reverse print on clear - cover reg marks in masking tape - laminate with white (white adhesive side ofc) cut white/masking tape off to reveal reg marks - cut, collect

 

[Schickworks]

reverse print on clear - cover reg marks in masking tape - laminate with white (white adhesive side ofc) cut white/masking tape off to reveal reg marks - cut, collect

what he said.... piece of cake. your basically substituting white vinyl for clear overlaminate.

 

[TXFB.INS]

Thanks!!!

will give it a go and hopefully the brain is not fried to grasp the instructions.

 

[kanini]

reverse print on clear - cover reg marks in masking tape - laminate with white (white adhesive side ofc) cut white/masking tape off to reveal reg marks - cut, collect

Thanks a 1000!! I recently did a bunch of similar decals (turned out great) but never realized how to use crop marks (the decals I made was just squares). Great advice, will try the masking tape next time!

 

[Jackpine]

"Taking The Mystery Out of Print and Cut"

Roland published a booklet years ago "Taking The Mystery Out of Print and Cut". It is available as a download. What you need to know is in the booklet and much more.

 

[Jackpine]

Here is what you need.....

http://www.rolanddga.com/resources/pdf/Roland_Mystery_Book.pdf

 

[bigben]

Here is what you need.....

http://www.rolanddga.com/resources/pdf/Roland_Mystery_Book.pdf

Thank you for sharing this. I've read it and in the double sided print, it written use ''white light blocking'' vinyl. I've been searching this for a while and never found any. What could be the brand and where can I get it?