Rigid Clear Material

[animenick65]

Hey, all. I'm trying to get my hands on some type of material that is semi rigid and printable. Something like a mylar. Sihl makes a 7mil clear, but no one is carrying it. I've tried Fellers but they don't carry anything either. Any ideas?

 

[artbot]

depending on how you're set up, you could get some .040 or .040 PETG, spray it with some cab lacquer (i use sherwin williams sherwood cabacrylic). PETG is so cheap, it's almost free. of course you could use thin polycarb as well, but why foot the cost when you don't need to. PETG doesn't cut as nicely as it used to. manufacturers have been cutting back on the glycols over the years. recently it's been like brittle tupperware.

 

[Zendavor Signs]

Grimco sells a 10mil clear polycarb that is not too expensive. You may try Lexjet too.

 

[Wiggum PI]

Image perfect IP2912, should be available from any spandex supplier.