OK I gave a brief desc of this in a previous thread. I rip a file in to production manager, it reads for example 8"x12". I unclicked enable driver options just in case to try to fix this problem. When the printer prints the file its coming out to like 20"w!! Every setting I have checked looks normal. Any ideas on what is causing this? I am using a Mutoh 1614 via USB port.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Rip reads one size, print comes out over double that?!
- Thread starter LenXIII
- Start date
S
Stan B
Guest
we had this then we accidentally increased proportional enlargement to 300% (on the first screen in flexi rip)
zmatalucci
New Member
you need a smaller printer
j/k sorry
j/k sorry
S
Stan B
Guest
try to use "no profile" settings with no profiles at all to run a test print. Also click all "default settings" buttons you can find ONLY then on printing dialog of that particular design
(if you are not very familar with flexi then hold on doing it so you don't mess anything up)
(if you are not very familar with flexi then hold on doing it so you don't mess anything up)