Rockhopper 2 problem

[Martin Yarrow]

Hi, this is my first post.
I have had a problem with my printer telling me the pump counter needed resetting but whilst pressing buttons to reset the counter I seem to have reset all the counters and now the printer tells me it is a 50" model and not a 60".
I have managed to get hold of a service manual but cannot see where I can reset it back to a 60" one.
Any help would be much appreciated,
Martin

 

[The Big Squeegee]

Welcome from OK USA

Sorry, can't help you with that...Any time I had problems like that with my Rockhopper, I would play with the menus until I found something related to the problem.

 

[henryp]

This is an old printer and I am not sure which hidden menu sets the machine size but you can try switching the printer off the press and hold down both the Up and Down buttons as you switch the printer on. If that is not the correct menu, try holding down the Cancel button as you switch the printer on.

 

[tandem signs]

Press and hold Func 2 and 4 with the menu down button when you turn the machine on, its in one of those menus.

 

[sar bossier]

Bonjour from Louisiana, USA! Sorry, I have a Roland, but welcome anyway!