• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Roland BN-20 Service application

dweavers

dweavers

New Member
service application software for the BN-20
I have the service manual but are wanting the software to perform checks etc on the machine
Can anyone help?
 
J

Joe House

Sign Equipment Technician
The service app requires a code from Roland that is tied to the serial number and good for three days. You'll have to work with a Roland tech for that.
 
Richieb

Richieb

New Member
Hi there used to be a crack available but it doesn’t seem to work anymore is there another one available? Or does someone know how to get round it
 
MP Custom

MP Custom

New Member
Can you give me your email?
I'm not home at the moment, but I managed to find a copy that works without registration.
It does seem to be online anymore. But I am sure I have it downloaded somewhere.
I use it all the time.
 
S

SoonerGlue

New Member
Curiously, did anyone elses RolandBN20A and Versaworks randomly stop working together within the last few days? I'm unsure if a new update came out that I missed.

My BN20A and Versaworks have worked fairly flawlessly over the last year. However, I started them both up today and Versaworks is telling me the printer is not connected, despite moving the spring lever forward.

I can still control the printer via BN20 Utility app and also see my ink levels.

Things I have done:

Shut both down and restarted together. No changes.
Deep cleaned and emptied waste bin. No changes.
Tried a different printer to USB cord. No changes.
Factory Reset BN20A. No changes.

My VersaWorks version is 6.19.2 and my Firmware Version is 3.10.

Anyone have any ideas?
 
dweavers

dweavers

New Member
SoonerGlue said:
Curiously, did anyone elses RolandBN20A and Versaworks randomly stop working together within the last few days? I'm unsure if a new update came out that I missed.

My BN20A and Versaworks have worked fairly flawlessly over the last year. However, I started them both up today and Versaworks is telling me the printer is not connected, despite moving the spring lever forward.

I can still control the printer via BN20 Utility app and also see my ink levels.

Things I have done:

Shut both down and restarted together. No changes.
Deep cleaned and emptied waste bin. No changes.
Tried a different printer to USB cord. No changes.
Factory Reset BN20A. No changes.

My VersaWorks version is 6.19.2 and my Firmware Version is 3.10.

Anyone have any ideas?
Click to expand...
Re install versa works, and NEVER run updates, there seems to be so many issues with automated updates
 
You must log in or register to reply here.
Top