Roland CAMM 1 Pro 500

[crescent]

I need to know if Flexisign will work and what version to order.
My equiptment is as follows:

Roland CAMM 1 Pro 500 Serial # ZO1-3033

Mac Power Book G4 OS X 10.4.11
Machine Name: PowerBook G4 15"
Machine Model: PowerBook3,5
CPU Type: PowerPC G4 (3.2)
Number Of CPUs: 1
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.5.3f2
Serial Number: QT244BS9N4L

Adobe Illustrator 11 CS 1

I would like to get my Roland working and don't know what software to buy.

Dave McKusick

 

[Service Sign Co]

Get a PC and avoid a lot of wasted time searching for drivers

 

[Mainframe]

Keep Your Mac!!!! You can design in illy & cut your files in Flexi starter quite nicely, Get it here www.masterwarehouse.com, I repeat, Keep your Mac!!!

 

[DRamm76]

MAC or PC..Hooks and lines LOL..

If you have a GX Series vinyl cutter, call Roland with the serial # and they will send you a replacement copy of Cut Studio for Illustrator Plug In..If not then FlexiStarter will work just fine..

 

[crescent]

I have an older Roland CAMM 1 Pro 500 Roland has been no help at all.

 

[DRamm76]

Call me tomorrow and I'll help you out personally. Or you can private message me on here.

 

[FatCat]

Download a free trial of SignCutX2.

http://www.sc-x2.com/