Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

roland camm1 pnc 1000 vinyl slipping

Discussion in 'Roland' started by cleethorpessigns, Aug 13, 2012.

  1. cleethorpessigns

    cleethorpessigns New Member

    12
    0
    0
    Aug 13, 2012
    Hello all
    I have been having problems cutting vinyl on the cutter as the vinyl slips off one roller and also from time to time it cuts a letter on top of a previous letter,any ideas what could be causing this please as i have a van to do the writting for.
    I have also had a err 2 wrong parameters error come up and missed a word at the end of a sentence,
    thanks all
    Thanks
     
    Tags:
  2. ligonr

    ligonr New Member

    10
    0
    0
    Aug 1, 2012
    the problem with the vinyl slipping is the pinch roller but it cutting over its self is a communication error
     
  3. cleethorpessigns

    cleethorpessigns New Member

    12
    0
    0
    Aug 13, 2012
    cheers m8
    ive cleaned the rollers and seems better,could it be a bad condition from the serial lead from pc to cutter?
     
  4. ligonr

    ligonr New Member

    10
    0
    0
    Aug 1, 2012
    it could just be the cable
     
Loading...

Share This Page

 


Loading...