Roland FJ50 problem service mode.

[X86luca]

Hello everyone I have a big problem! I can't get into service mode on my Roland FJ50. I perform the key combination as reported in the Service Manual but nothing happens. The plotter gives me the error: service mode is protected. I attach a photo of the manual and error. Thanks for your help. regards Luca.

 

[damonCA21]

Are you doing it with the subpower off ? it should be plugged in and turned on at the wall, but not turned on from the front panel. Press the 3 direction keys together then while holding them press the power button on and it should work

 

[X86luca]

Yes, the secondary power supply is turned off. Then with the three keys pressed. I turn on. It gives me an error anyway.

 

[balstestrat]

Nevermind.

 

[Jim Hancock]

That is the key sequence Roland puts in their manuals by default. It isn't meant to be correct, only to mislead.

I'll attach 2 files later. Having upload issues. Your machine will likely use the old sequence.

 

[X86luca]

Thanks, I'm waiting for the right sequence.

 

[X86luca]

That is the key sequence Roland puts in their manuals by default. It isn't meant to be correct, only to mislead.

I'll attach 2 files later. Having upload issues. Your machine will likely use the old sequence.

If you have problems uploading files. You can send me the files via email ltk4548@gmail.com Thanks.

 

[Jim Hancock]

Here they are... my internet sometimes gets really slow out in the country...

 

[X86luca]

Eccoli... la mia connessione Internet a volte diventa molto lenta in campagna.

Perfect! It worked! With the old combination I can enter service mode. Thank you 1000!!!!

 

[X86luca]

Do I need to follow this procedure to set up the 4-color CMYK printer? I was wrong. I reset the eeprom. Now it doesn't print well anymore. Dull and striped colours. I lost all settings.