Question roland pinch roller part #?

[netsol]

can't figure out what i did with the damn service manual...

our SC545-ex was tracking poorly a couple weeks ago, and i broke the cardinal rule, i changed one of the end pinch rollers. (ALSO, I USED A CHEAP CHINESE ROLLER
FROM EBAY)

everything seemed fine until i loaded a roll of 38" 13 oz banner on sunday. it mis-tracks by several inches.

if someone can give me the part number for the outside pinch rollers, i will call in an order and drive to Tyreltek and pick some up, ending my problem (and my embarrassment,
since i would lecture anyone else about the 2 rules i broke

 

[balstestrat]

I have no clue which one is the outer one.

 

[netsol]

I have no clue which one is the outer one.

View attachment 160631

thank you! i guess i don't care, i will just buy 2 of each

 

[netsol]

i assume FD is flat (center) &
TD is tapered (outside)

 

[Joe House]

#9 is for left and right pinch rollers
#8 is for center rollers

 

[netsol]

#9 is for left and right pinch rollers
#8 is for center rollers

thanks, joe

 

[Joe House]

I was being lazy. There have been a few updates to that part. Any of these will work if you can find them:
For the L/R wheels:
6000003824, 21565102 or the current part number is 1000022932
For the Center wheels:
6000003823, 21565103 or the current part number is 1000023140