Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Roland PNC-960 DIP Switch Settings

Discussion in 'Roland' started by eccs19, Mar 15, 2010.

  1. eccs19

    eccs19 New Member

    Mar 1, 2010
    My old Roland has a couple of DIP switches that I'm not sure what the difference is in the settings. For the most part, it works great the way it is, but mostly curious as to what conditions you would change these settings.

    1. Blade Offset 0.25 or 0.175 (currently set to 0.25)
    2. Sheet Weight Light or Heavy (currently set to light)
    3. Smoothing On or Off (currently set to ON)

  2. J Hill Designs

    J Hill Designs Major Contributor

    Sep 24, 2004
    I set sheet weight to heavy when doing s/b mask - need to turn off and back on for settings to take effect

    It cuts slower (snail-like)

Share This Page