• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Roland RE-640 Printing Issue on Banners

Adam24

Adam24

New Member
Hi have a huge issue this morning suspecting need a new encorder is this correct?
See attached images.

See images the prints jumping a lot tried it with various media still same issue.

Thanks
 

Attachments

  • CEFACA75-D07C-43DB-970C-935CF062586C.jpeg
    CEFACA75-D07C-43DB-970C-935CF062586C.jpeg
    1.8 MB · Views: 274
  • FB002E9C-3F43-427B-A0F3-E8412E45A57C.jpeg
    FB002E9C-3F43-427B-A0F3-E8412E45A57C.jpeg
    1.7 MB · Views: 244
  • BA259FE7-1AED-4F59-B342-E9C4B5396829.jpeg
    BA259FE7-1AED-4F59-B342-E9C4B5396829.jpeg
    1.9 MB · Views: 245
  • 8FF4ECC5-C315-42CB-95C3-1ABEB696A050.jpeg
    8FF4ECC5-C315-42CB-95C3-1ABEB696A050.jpeg
    2.1 MB · Views: 232
Solventinkjet

Solventinkjet

DIY Printer Fixing Guide
That's a dirty or damaged encoder strip for sure. Try cleaning it with some isopropyl alcohol and take a nice look to see if there are any damaged spots. If it looks perfectly clean and still gives you this type of print, you probably need to replace it and/or the sensor that reads it.
 
You must log in or register to reply here.
Top