• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help ROland sp 540 v test print issues

K

kensign

New Member
hi, Could any one please help me to slove this. Test print always show up like this . before was normal and now noticed bandings.. thanks
 

Attachments

  • 20180523_093451.jpg
    20180523_093451.jpg
    1.2 MB · Views: 288
Solventinkjet

Solventinkjet

DIY Printer Fixing Guide
It looks like you could use a maintenance overhaul on that. The yellow has cross contamination which indicates that the damper may be failing and/or the cap top is worn out and/or clogged. If you haven't replaced the dampers and cap tops in the last year or so, I would start there. While you are in there you should flush the pump and make sure it isn't clogged as well.
 
You must log in or register to reply here.
Top