• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

roland sp300v no ink

C

choppa

New Member
hi all i recently bought some new refillable ink cartridges put them in as instructed that they would be just plug and play now i have no inkl coming through anyway after a nasty taste in my mouth and a messy face i sucked all the ink through to the dampers i know i shouldnt have done this and prob poisened myself LOL but needs must when you cant get a syringe there and then weas panicing the heads would dry up so there we have it but upon the dampers being full i did a test print and get nothing on the vinyl some one has said i have to get the ink to the print heads some how but i dont know how to do this can anyone help
 
T

Terry01

New Member
Presuming your captops are in good condition, run a couple of cleaning cycles, then try another test print.
If no print, you will need to check the two fuses for the heads, on the main board.
 
You must log in or register to reply here.
Top