Hi everyone, I'm having contour cut issues, it had been dead accurate after being calibrated by a Roland technician and is mostly still accurate except when going back to start a new shape like the centre of a letter and cutting it way off target. Any suggestions much appreciated.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Roland SP540V Contour Cutting
- Thread starter JLD984
- Start date
rjssigns
Active Member
Our SP540 will cut dead accurate when doing a print/cut routine. It will knock out hundreds of labels with negligible drift. Contour cutting after lamination is another story. We limit ourselves to about 5' give or take a shade.
We do all our own calibration through the service menu and keep up with it, so I suspect it is the nature of the beast.
That is why I'm going to buy a dedicated rig for longer contour cuts on laminated materials.
We do all our own calibration through the service menu and keep up with it, so I suspect it is the nature of the beast.
That is why I'm going to buy a dedicated rig for longer contour cuts on laminated materials.