Roland xr keeps saying ink not filled HELP!!

[jus.hila]

Hey guys we did a flush and cleared out the third party oem max2 to swap OEM max 2.

I tried doing a ink fill now it keeps saying "ink not filled" and won't detect my ink cartridges anymore but it was detected earlier when I was doing powerful cleans. Help!!!

 

[Joesignshop]

My yellow cartridge does the same on Roland VG640. I have to power down and unplug for 30 seconds and then shows detected. Not sure what the problem is but it's a fix for now.

 

[jus.hila]

Anybody?

 

[cornholio]

Update to latest firmware.

 

[jus.hila]

Update to latest firmware.

I did that. I think that's what caused this. I just looked up the firmware and it's no longer compatible with ecomax 2. So I have a bunch of ink that's not compatible due to the firmware upgrade and I have no way of downgrading the firmware.

 

[cornholio]

The latest firmware is definitely compatible with Roland EcoMax2. No need to downgrade.
3rd party ink may be different.

 

[guillermo]

check the chips in the cartridges, sometimes, I sand the chip and will be ok.