Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Roland_ Calibration different on each side of printer

Discussion in 'Roland' started by what the, May 29, 2013.

  1. what the

    what the Owner/op

    87
    0
    6
    Feb 16, 2010
    Sacramento
    All of a sudden- The second round of the same signs printing; I noticed a banding. Ran a test print and there was a perfect gap between the colors (calberation issue)
    All the Bi directional test came back different everytime! WTF!
    I cleaned encoder strip, Now the Bi-directional seems ok but the calibration is a perfect +.015 on the right side (which its set at now) Running a calberation test on the left side of the printer is not stable, it looks better at -.015 and sometimes -.05
    Any suggestions before I jump!
    Thank you!
    Amber
     
    Tags:
  2. FrankW

    FrankW Very Active Member

    1,305
    131
    63
    Oct 19, 2008
    Germany
    If you use a Print & Cut, it could be that the left pinch roller have a problem.
     
Loading...

Share This Page

 


Loading...